Engineer who runs a ship's engines and machinery
Runs and repairs a ship's engines, power and machinery at sea.
Marine engineers keep a ship moving. They operate and maintain the main engines, generators, pumps, boilers and other machinery, and lead the engine-room crew; the most senior is the Chief Engineer. After Class 12 the usual route is a 4-year B.Tech in Marine Engineering at a DG Shipping-approved institute, then sea service as a trainee or junior engineer and the Marine Engineer Officer (MEO) Class IV Certificate of Competency exam conducted by the Directorate General of Shipping. Mechanical and some other engineering graduates can instead take a 1-year Graduate Marine Engineering (GME) course. Experienced marine engineers can also move ashore to shipyards, ship-management companies and marine surveying.
Every stage from school to your first day on the job.
Class 11–12
PCM with good English
60% in PCM and 50% in English are needed, plus DG Shipping medical and eyesight standards.
2 years
Entrance
IMU-CET or institute test
IMU-CET for Indian Maritime University campuses and many affiliated institutes.
Once a year
B.Tech
B.Tech Marine Engineering
Thermodynamics, marine machinery, ship systems, electrical engineering and workshop training.
4 years
Sea service
Trainee / junior engineer at sea
The sea service DG Shipping requires before your first competency exam.
Several months
CoC
MEO Class IV Certificate of Competency
Written and oral exams by DG Shipping; then sail as Fourth or Third Engineer.
3–6 months
Career
Higher certificates
MEO Class II for Second Engineer and Class I for Chief Engineer, after more sea time.
Ongoing
Class 11–12
PCM with good English
60% in PCM and 50% in English are needed, plus DG Shipping medical and eyesight standards.
2 years
Entrance
IMU-CET or institute test
IMU-CET for Indian Maritime University campuses and many affiliated institutes.
Once a year
B.Tech
B.Tech Marine Engineering
Thermodynamics, marine machinery, ship systems, electrical engineering and workshop training.
4 years
Sea service
Trainee / junior engineer at sea
The sea service DG Shipping requires before your first competency exam.
Several months
CoC
MEO Class IV Certificate of Competency
Written and oral exams by DG Shipping; then sail as Fourth or Third Engineer.
3–6 months
Career
Higher certificates
MEO Class II for Second Engineer and Class I for Chief Engineer, after more sea time.
Ongoing
What you need before you can start.
Minimum qualification
Class 12 with PCM (60% aggregate) and 50% in English; B.Tech Marine Engineering (or B.E. / B.Tech Mechanical + GME); DG Shipping medical standards
Class 11–12 stream
IMU-CET eligibility
For B.Sc Nautical Science and B.Tech Marine Engineering: Class 12 with Physics, Chemistry and Maths (60% aggregate in PCM) and 50% in English (Class 10 or 12), plus DG Shipping medical and eyesight standards.
Age limit: Upper age limits apply to undergraduate courses (about 25 years for General-category men, higher for women and reserved categories); check the year's notification
The exams that open the door to this career.
A typical promotion ladder, from your first role to the top.
Indicative pay at each stage of the career.
Indicative only: pay is usually earned for the months on board, is often set in US dollars, and varies a lot by company, ship type and the shipping market.
Figures are indicative and change with pay commissions, employer, city and experience.
Degrees and programmes that lead here.
More in Merchant Navy and Private.
Weighing up your options?
Put Merchant Navy Marine Engineer side by side with other careers, or browse every roadmap.
Always confirm dates, eligibility and fees on the official websites before applying.