Track Maintainer, Pointsman, Assistant (S&T, workshop and others) — through RRB Level 1 (Group D)
Keeps railway tracks, signals, workshops and yards safe and working — a permanent Indian Railways job after Class 10.
इस पेज का अभी हिन्दी अनुवाद नहीं हुआ है, इसलिए इसे अंग्रेज़ी में दिखाया गया है।
Level 1 staff are the large ground team of Indian Railways. Track Maintainers walk and check the track, tighten fittings and replace worn parts so trains run safely. Pointsmen work points (the switches that move trains between tracks) and help with shunting at stations. Assistants help technicians in departments such as Signal & Telecommunication (S&T), Electrical, Mechanical workshops and carriage depots. These posts are filled through Railway Recruitment Boards' Level 1 recruitment, still widely called RRB Group D. Since a Railway Board order of January 2025, a Class 10 pass is enough for all these posts (an ITI or National Apprenticeship Certificate also qualifies). Selection is a computer-based test, a physical efficiency test, document check and a medical exam. The work is often outdoors in heat, rain and at night, but it is secure and many staff later move up through promotion or by taking RRB NTPC or ALP exams.
स्कूल से लेकर नौकरी के पहले दिन तक, हर पड़ाव।
Class 10
Pass Class 10 and stay fit
Class 10 is enough. Start daily running and strength exercise for the physical test.
1 year
ITI (optional)
ITI trade for technical roles
An ITI in Fitter, Electrician, Welder or a similar trade is not required but helps in workshop and S&T assistant jobs and later promotions.
1–2 years
RRB Level 1
Computer-based test
About 100 questions in 90 minutes on general science, maths, reasoning and general awareness, with negative marking.
About 6–9 months
Physical test
PET, documents and medical
Men carry 35 kg for 100 m in 2 minutes and run 1,000 m in 4 min 15 s; women carry 20 kg and run 1,000 m in 5 min 40 s. A medical test checks the eyesight standard for your post.
2–4 months
Joining
Initial training and posting
Short training in safety rules and your department's work, then posting in a railway zone.
A few weeks to months
Class 10
Pass Class 10 and stay fit
Class 10 is enough. Start daily running and strength exercise for the physical test.
1 year
ITI (optional)
ITI trade for technical roles
An ITI in Fitter, Electrician, Welder or a similar trade is not required but helps in workshop and S&T assistant jobs and later promotions.
1–2 years
RRB Level 1
Computer-based test
About 100 questions in 90 minutes on general science, maths, reasoning and general awareness, with negative marking.
About 6–9 months
Physical test
PET, documents and medical
Men carry 35 kg for 100 m in 2 minutes and run 1,000 m in 4 min 15 s; women carry 20 kg and run 1,000 m in 5 min 40 s. A medical test checks the eyesight standard for your post.
2–4 months
Joining
Initial training and posting
Short training in safety rules and your department's work, then posting in a railway zone.
A few weeks to months
शुरू करने से पहले आपके पास क्या होना चाहिए।
न्यूनतम योग्यता
Class 10 pass, or ITI / National Apprenticeship Certificate; age 18–33 in the latest (CEN 09/2025) recruitment, with relaxations
कक्षा 11–12 की स्ट्रीम
RRB Group D (Level 1) के लिए योग्यता
Class 10 pass, or ITI, or a National Apprenticeship Certificate (NAC) from NCVT, by the closing date in the notification. An engineering diploma or degree is not accepted in place of ITI unless a post says so. Each post also has a medical standard, so check the post table in the notification.
आयु सीमा: 18 – 33 years on the date set in the latest notification (relaxation: OBC (non-creamy layer) +3, SC/ST +5, PwBD +10 to 15 years; extra relaxation for ex-servicemen, serving railway staff and course-completed Act Apprentices)
वे परीक्षाएँ जिनसे इस करियर का रास्ता खुलता है।
पहली नौकरी से सबसे ऊँचे पद तक, आम तौर पर प्रमोशन ऐसे होता है।
करियर के हर पड़ाव पर लगभग कितनी सैलरी मिलती है।
Plus Dearness Allowance, HRA and other allowances as per the 7th Pay Commission. Railway staff also get free rail passes and railway medical care.
ये आँकड़े अनुमान हैं — वेतन आयोग, नियोक्ता, शहर और अनुभव के साथ बदलते रहते हैं।
वे डिग्री और कोर्स जो आपको यहाँ तक ले जाते हैं।
ITI
Industrial Training Institute — Craftsman Training (NCVT / SCVT)
ITI · 1 – 2 years depending on trade
ITI Fitter
Fitter trade — NCVT craftsman training
ITI · 2 years, followed by an apprenticeship
ITI Electrician
Electrician trade — NCVT craftsman training
ITI · 2 years, followed by an apprenticeship
ITI Welder
Welder (Gas & Electric) trade — NCVT craftsman training
ITI · 1 year, followed by an apprenticeship
Railways और सरकारी क्षेत्र के और करियर।
कौन-सा रास्ता चुनें, सोच रहे हैं?
Railway Track Maintainer / Level 1 Staff को दूसरे करियर के साथ रखकर तुलना करें, या सारे रोडमैप देखें।
आवेदन से पहले तारीख़ें, योग्यता और फ़ीस आधिकारिक वेबसाइट पर ज़रूर जाँच लें।